2019精品国产品在线18年

<em id="aj2zl"></em>

        <tbody id="aj2zl"><noscript id="aj2zl"></noscript></tbody>
        Scott Machinery Letterhead

        MEP Shark 282 CCS Constant Cut Bandsaw, Double Mitre

        SHARK 282, Cut Control System (CCS) band sawing machine to cut from 45潞 right to 60潞 left. In this version, the sawing machine can make single cuts without an operator, using the head weight controlled by a spring and a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut .

        Features
        The MEP Shark 282CCS Bandsaw has the excellent inherent design features listed below:
        Quality Italian Manufacturing
        Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle.
        Vice with fast clamping device.
        Hydraulic transducer to visualize band tensioning.
        Electric pump for band lubrication and cooling.
        Wire chip brush for band cleaning.
        Head return spring.
        Adjustable rod to measure stop to make cuts of the same length with millimetre steel rod.
        Stock support arm with roller predisposed to mount loading table.
        Control handle of the manual cycle at 24 V, IP55.
        Wide working surface with rotating table installed on a roller bearing, dia. 265 mm, pre-loaded with thrust bearing.
        Double band rotation speed (36/72 m/min)
        Manually-operated blade tensioning through electronic transducer, with display.
        Steel base with removable coolant tray.
        Machine arranged for handling with movement equipment.
        • Optional
        • Spray mist system
        • Foot pedal
        • Work lamp & Laser
        • Loading Tables
        • Unloading Tables
        • Measuring stops

        Specifications

        MEP Shark 282 CCS
        Capacity Straight +45deg +60deg -45deg
        Round 250mm 230mm 120mm 200mm
        Square 220mm 200mm 80mm 170mm
        Rectangular 280 x 220mm 220 x 200mm 140 x 80mm 200 x 140mm
        Blade size 2950 x 27 x 0.9mm
        Blade speed 36 / 72 m/min
        Motor power 1.5 / 1.8kW, 3 Phase
        Floor size 1315 x 1800mm
        Shipping 3.2m3, 510kg
        Details are not binding All prices exclude GST.
        0800 215 215