2019精品国产品在线18年

<em id="aj2zl"></em>

        <tbody id="aj2zl"><noscript id="aj2zl"></noscript></tbody>
        Scott Machinery Letterhead

        MEP Shark 332 SXI evo Semi Automatic Bandsaw, Double Mitre

        Shark 332 SXI evo, semi-automatic electro-hydraulic band sawing machine, for cutting from 45潞 right to 60潞 left.
        鈥?Machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP.
        鈥?Semi-automatic cycle: Starting the cycle: 鈥?the vice closes and the motor starts 鈥?the head goes down to execute cut 鈥?motor stops 鈥?head returns to top position and vice opens.
        鈥?Semi-automatic dynamic cycle: lowering the head manually, so as to position it just above the material, the semi-automatic cycle starts by pressing trigger switch on handle.

        Features:
        The MEP Shark 332 SXI evo Bandsaw has the excellent inherent design features listed below:
        鈥?Quality Italian Manufacturing
        鈥?Console with all centralized controls, installed on an articulated arm.
        鈥?Low voltage soft keyboard, in polyester, with thermo-shaped buttons, with tactile feeling and sound signal when operating.
        鈥?Display for the following messages: Diagnostic + Alarms (cause description). + Input and output status. + Cut counting. + Time spent for the cut made. + Blade motor absorption. + Blade tension. + Blade speed. + Numeric displaying of the head position.
        鈥?Control handle of the manual cycle at 24 V, IP55.
        鈥?Program with several special cutting cycles.
        鈥?Latest generation hydraulic control unit, with high efficiency and low energy consumption.
        鈥?Rotating table (mounted on a 420 mm roller bearing, pre-loaded with thrust bearing) with steel vice plates which can be replaced after wear.
        鈥?Double band rotation speed (40/80 m/min) with card PRESET to mount the electronic inverter for the continuous adjustment of the band speed (from 15 to 100 m/min).
        鈥?The limits of the head stroke are programmed through the control board, depending on the dimensions of the bars to be cut.
        鈥?Sliding vice with sideways movement and fast positioning system which functions in automatic also when in manual mode.
        鈥?Manually-operated blade tensioning through electronic transducer, with displaying.
        鈥?Steel base allows to recover coolant also when cutting at the maximum degrees.
        鈥?Coolant tank inside the steel base with electric pump so as to lube-refrigerate band. The drawer to collect chips can be replaced with a motorized chip evacuator (see optionals).
        鈥?Preset to be equipped with the spray mist system (OPTIONAL), as well as with the standard delivered traditional lubrication with emulsible oil.
        鈥?Wire chip brush for band cleaning.
        鈥?Machine arranged for handling with movement equipment.
        鈥?Adjustable rod to measure stop to make cuts of the same length with millimetred steel rod.
        鈥?Stock support arm with roller predisposed to mount loading table.
        鈥?Bi-metal band for solids and sections.
        鈥?Service keys and instructions manual for maintenance and spare parts list.
        • Quality Italian Manufacturing
        • Optional
        • Loading tables
        • Unloading tables
        • Spray mist system
        • Laser alignment and work light
        • Variable vice pressure

        Specifications

        MEP Shark 332 SXI evo
        Capacity Straight +45擄 +60擄 -45擄
        Round 300mm 260mm 180mm 200mm
        Square 260mm 250mm 170mm 180mm
        Rectangular 330 x 260mm 270 x 200mm 170 x 170mm 200 x 160mm
        Blade size 3320 x 27 x 0.9mm
        Blade speed 40/80 m/min
        Motor power 1.5/1.8kW 415V 3 Ph
        Floor size 1400 x 2130mm
        Weight 675kg
        Shipping 5.07m3, 700kg
        Details are not binding All prices exclude GST.
        0800 215 215