2019精品国产品在线18年

<em id="aj2zl"></em>

        <tbody id="aj2zl"><noscript id="aj2zl"></noscript></tbody>
        Scott Machinery Letterhead

        MEP Cobra 352 SX EVO Aluminium Circular Saw, Semi Automatic

        COBRA 352 SX Evo, semi-automatic electro-pneumatic sawing machine to cut aluminium and light alloys using blade with electro-welded hard-metal plates (HM).
        鈥?The machine cuts from 45擄 right to 45擄 left and the head tilts from 0擄 to 45擄 left so as to make inclined cuts.
        鈥?Sawing machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP.

        Operation
        鈥?Starting the cycle by means of the relative push-button the following steps are carried out: - the vice closes and the motor starts 鈥?the head goes down to execute cut 鈥?motor stops 鈥?head returns to top position and vice opens.

        Features
        鈥?Quality Italian manufactured
        鈥?Interlocked guarding
        鈥?16 characters read on two lines so as to visualize technological parameters such as: + number of cuts carried out + cutting time + amperometer + diagnostics and/or caution messages (more than 100) visualized.onsole with all centralized controls, installed on an articulated arm to follow the operator in every operating position for the controls and the EMERGENCY.
        鈥?Registration of alarms and events with the possibility to visualize the story of occurred events.
        鈥?Panel with low tension controls: polyester membrane keypad with tactile thermo-shaped buttons which give out an acoustic signal when pressed.
        鈥?Rotating table mounted on bearing for a smooth and precise rotation.
        鈥?Material is clamped by means of two pneumatic vices which can be freely positioned along the longitudinal axis of the material.
        鈥?Adjustable mechanical stops at 0擄 and 45擄 left/right to position the head quickly.
        鈥?Chip conveyor predisposed to mount optional chip collector (OPTIONAL).
        鈥?Shearing stress control.
        鈥?Pneumatic vertical vice.
        鈥?Automatic device to lubricate the blade only when the machine is cutting.
        鈥?Adjustable rod to measure stop to make cuts of the same length with millimetred steel rod.
        鈥?The machine is supplied without saw blade.
        鈥?Pre-set to be equipped with the spray mist system (OPTIONAL), as well as with the standard delivered traditional lubrication with emulsible oil.
        鈥?Service keys and instructions manual for maintenance and spare parts list.
        • Optional
        • Circular blade 350 x 32mm
        • Supplementary foot pedal with E/stop
        • Loading tables
        • Unloading tables
        • Chip extraction
        • Comb jaws
        • Spray mist system

        Specifications

        Model Cobra 352 SX Evo
        Capacity Straight +45 Degrees -45 Degrees
        Round 120mm 110mm 120mm
        Square 105mm 95mm 100mm
        Rectangular WxH 180x70mm 135x60mm 135x60mm
        Vice opening 180mm
        Blade size 350 x 32 x 3.4mm
        Blade speed 1700 / 3400 rpm
        Motor power 1.5 / 2.2kW, 415V. 50Hz, 3 Phase
        Floor size 1.24 x 1.36m
        Weight 285kg
        Shipping 3.2m3 - 320kg
        Details are not binding All prices exclude GST.
        0800 215 215