2019精品国产品在线18年

<em id="aj2zl"></em>

        <tbody id="aj2zl"><noscript id="aj2zl"></noscript></tbody>
        Scott Machinery Letterhead

        BARON MAX

        BARON MAX KE-650 ZNC + 90A Used EDM

        $6,900.00

        ZNC - Programmable Z axis (Quill) which calls up to 10 different pre-defined spark erosion setting at different heights, generally: Roughing, semi roughing, semi finishing then finishing.

        Orbi-Cut Head System Model COC-280 - This head has a small programmable travel equivalent to X & Y axis. This feature is often used to create an orbital movement which will enable better flushing and can also compensate for electrode wear or be used to size pockets. Other patterns can also be programmed such as square, hexagonal , octagonal etc.

        Machine has came out of a fully working situation.Note: 1st Photo is from catalogue.
        • Features
        • 3 Axis Digital Readout System
        • 3 phase, 90 Amp Generator
        • Ballscrews on X, Y & Z Axis
        • Z axis servo driven
        • Paper filter filtration
        • Halogen lamp
        • 14" CRT monitor
        • Made in Taiwan
        • Operating manual

        Specifications

        BARON-MAX EDM Model KE-650 ZNC
        Internal tank 1700 x 1000 x 550mm H
        Work table size 1100 x 600mm
        Longitudinal travel 650mm
        Cross travel 550mm
        Workhead travel 300mm
        Quill (servo) travel 270mm
        Distance Electro head to table 835mm
        Max electro load 220 kg
        Dielectric reservoir capacity 1345 litres
        Power Supply Generator
        Max output current 90 Amp
        Max machining current 8 Kva
        Max metal removal rate 600mm/min
        Best surface finish < 0.3 u/Ra
        Min electrode wear < 0.2 %
        Machine weight 3000 kg
        Machine dimension l x w x h 2200 x 1830 x 2250mm
        Reservoir dimensions 2050 x 1300 x 460mm
        Details are not binding All prices exclude GST.
        0800 215 215